« previous next »
Pages: [1]   Go Down

Author Topic: Cut down Bubba'd SKS and ultra-customized Bullpup SKS  (Read 4358 times)

0 Members and 1 Guest are viewing this topic.

Workingzombie

  • Board Supporter
  • SKS Guru
  • *****
  • Posts: 4721
  • Defending liberty with a communist-made rifle
Cut down Bubba'd SKS and ultra-customized Bullpup SKS
« on: March 15, 2022, 08:12:50 PM »
Found these on Pinterest. If already posted, let me know, and I'll remove them.



Logged
"No matter how cynical you get, it's impossible to keep up!"

                                        -Lily Tomlin

"Smells like government"
                                        -Wolverine

Hodgie

  • World renowned Failure
  • Board Supporter
  • SKS Guru
  • *****
  • Posts: 16260
  • Kicking Ass since 77
Re: Cut down Bubba'd SKS and ultra-customized Bullpup SKS
« Reply #1 on: March 15, 2022, 08:24:24 PM »
The never seen an SKS Obrez before.
Logged

Greatguns

  • Board Supporter
  • SKS Guru
  • *****
  • Posts: 11215
  • Inventor of the Intrafuse stock folding adapter
Re: Cut down Bubba'd SKS and ultra-customized Bullpup SKS
« Reply #2 on: March 15, 2022, 09:16:18 PM »
Instead of a Draco, it's a Simonaco, LOL.

The other one almost looks like it could be one of LKermit's custom jobs.
Logged

JimmyJamesKY

  • Board Supporter
  • SKS Guru
  • *****
  • Posts: 3924
  • I wish I didn't know now what I didn't know then..
Re: Cut down Bubba'd SKS and ultra-customized Bullpup SKS
« Reply #3 on: March 15, 2022, 09:49:34 PM »
I kind of dig the lower one.

The other one not so much.  I wonder the pistol cycles reliably..
Logged
Good friends will lend a hand, great friends will grab a leg....

LESchwartz

  • Global Moderator
  • SKS Guru
  • *****
  • Posts: 7128
  • Software Geek in Sunny Minnesota
    • SKS FAQ
Re: Cut down Bubba'd SKS and ultra-customized Bullpup SKS
« Reply #4 on: March 15, 2022, 11:49:35 PM »
I'm not so sure I would want the bullpup ejecting spent empties right into my face.  Cool looking, but completely non-functional.

Larry
Logged
"The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people so full of doubts."--Bertrand Russell

For more information see my SKS FAQ:  https://victorinc.com/SKS-FAQ.html

1mlt

  • Board Supporter
  • SKS Guru
  • *****
  • Posts: 13299
  • No place but TEXAS
    • TheSKSmagAdapter, LLC
Re: Cut down Bubba'd SKS and ultra-customized Bullpup SKS
« Reply #5 on: March 16, 2022, 01:31:55 AM »
I had a bullpup made by a former board member. The ejected rounds were not a problem. The lop was. And it was hard as hell to make trigger adjustments
Logged
There is but one language and that is the English language. Teddy R., 1907
Duck-bill-less mag adapters for the SKS are located at
www.thesksmagadapter.com

sks_rob

  • SKS Marksman
  • ***
  • Posts: 200
Re: Cut down Bubba'd SKS and ultra-customized Bullpup SKS
« Reply #6 on: March 19, 2022, 02:04:32 PM »
Quote from: 1mlt on March 16, 2022, 01:31:55 AM
I had a bullpup made by a former board member. The ejected rounds were not a problem. The lop was. And it was hard as hell to make trigger adjustments
Quote from: LESchwartz on March 15, 2022, 11:49:35 PM
I'm not so sure I would want the bullpup ejecting spent empties right into my face.  Cool looking, but completely non-functional.

I also had one made by a previous member (RIP), and while it was nice to hold and look at, well made, and fully functional, I could not get used to the action cycling right next to my face.  I was most likely in no real danger, but it was not enjoyable and I have not had it on a rifle past that one trip to the range.  I guess it's not for everyone.  Very cool looking, though.
Logged

Dannyboy53

  • SKS Expert
  • ****
  • Posts: 409
  • "Praise the Lord and pass the ammunition"
Re: Cut down Bubba'd SKS and ultra-customized Bullpup SKS
« Reply #7 on: May 17, 2022, 08:16:03 PM »
Quote from: 1mlt on March 16, 2022, 01:31:55 AM
I had a bullpup made by a former board member. The ejected rounds were not a problem. The lop was. And it was hard as hell to make trigger adjustments

I'm a "southpaw", me and this contraption wouldn't "gee-haw".
Logged
"I may be drunk, Miss, but in the morning I will be sober and you will still be ugly."     
-Winston Churchill

Gator417

  • SKS Plinker
  • *
  • Posts: 50
Re: Cut down Bubba'd SKS and ultra-customized Bullpup SKS
« Reply #8 on: January 27, 2023, 11:12:31 PM »
Can't imagine that little guy would function with such a short dwell time. Quite a ferocious little straight pull bolt gun though.
Gator
Logged

cvasqu03

  • Board Supporter
  • SKS Guru
  • *****
  • Posts: 6367
Re: Cut down Bubba'd SKS and ultra-customized Bullpup SKS
« Reply #9 on: January 30, 2023, 12:01:21 PM »
I think these have been posted at some point before (kind of like that SKS Gatling gun - Don't anyone dare dig that up BTW).  Still interesting to see them (again?).

I don't see how that top one would be legal without some NFA paperwork though, as it looks like it would count as a pistol derived from a rifle. I could be wrong about that though.
Logged
I am the one they call Cesar.

Filroy77

  • Board Supporter
  • SKS Guru
  • *****
  • Posts: 5622
  • Power to the People!
    • Baby Lives Matter
Re: Cut down Bubba'd SKS and ultra-customized Bullpup SKS
« Reply #10 on: January 30, 2023, 12:12:23 PM »
Don’t think I’d like the bull pup one with your face right over the action. Even a pierced primer could prove to be uncomfortable.
Logged
How can these people say such lies? Because lying is not an issue when truth is not a value. Dennis Prager

Blessed is the nation whose God is the LORD

Our Constitution was made only for a moral and religious people. It is wholly inadequate to the government of any other.
Pages: [1]   Go Up
« previous next »