Retail And Business > The Marcus Magazine Adapter
TAPCO SKS Mag without Duckbill
1mlt:
I'm up for discussion. I'd be interested. How does it mount? How long does it take to mount it? How HARD it is to mount, i.e., what types of tools are necessary? How long does it take to do the mod to your Tapco mags? I presume, if you can do it to a 20 you can do it to any other size Tapco. Is the bolt mod required? Can it be mounted in an original wooden stock? I'm sure there are other Q's. Marcus
dmac27:
I see two screws that appear to be holding the adapter block to the stock...I would presume the existing mag attachment point is also utilized for three points of contact. ???
galahad:
Guys, you can keep asking questions and if all of them are answered anyone would be able to figure out how to make one of these. It took 18 months to complete the prototypes and a LOT of work. The inventor is, obviously, going to hold much close to the vest. I will answer a few questions and that's it.
1. The average SKS owner will be able to install it.
2. Two holes, similar to the ones in the "M" and "D" models must be drilled in the stock.
3. The magazine mod is extremely easy and can be done with hand tools.
4. AK magazines are wider than the SKS receiver. To work with AK magazines ANY mod would require modifications to the receiver. NOT a good idea.
That's all the information that I can release to you. The only other thing I can tell you is that I have see it and it appears that it will be 100% reliable and if made from aluminum will last the life of the rifle.
Incidentally, if you don't want to modify your stock at all, and some of us don't, you could easily get one of the "cheapo" stocks and make it your 922r compliant system.
Zer0DazE:
Wasn't there a company in the past that already did this, and didn't the product disappear when it came to buying "their" mags because everyone bitched that they cost too much.
marcodelat:
--- Quote from: Toad442 on September 21, 2009, 04:02:29 PM ---Not interested. I'm long since done trying to turn a SKS into an AK.
--- End quote ---
+1 - and adding - "or anything else but what it is"... Not interested here.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version