Trigger issue wondering if you can fix

[Idahomatt]

Hello I haven't posted here for a while.   I have a factory 666 with a very sloppy trigger.  It has a milled trigger group and the trigger has a lot of creep wich I know you can fix that.  However it also has a ton of side to side movement (the trigger itself).  It feels very sloppy.  Just wondering if you have encountered this before and would it be extra to fix it. 

Thanks I know your busy.
Matt.

[Kivaari]

Usually the trigger pin holes are wallowed out and egg shaped.
A new trigger will fix this. Some have purchased Ben Murray's trigger lever and sent to me for installation when I tune the trigger..
Thanks
Tom aka Kivaari

[Rocketvapor]

Tom,
question.
Would an oversized pin and shims be of any use in the SKS trigger group?
Or really just a waste of time?

[Kivaari]

It would simply be easier to use a new trigger lever..