« previous next »
Pages: [1]   Go Down

Author Topic: Tapco 20rd springs - parts  (Read 6190 times)

0 Members and 1 Guest are viewing this topic.

Shepherd1

  • SKS Newbie
  • Posts: 9
Tapco 20rd springs - parts
« on: February 22, 2021, 11:57:56 PM »
Anyone know where to get parts for the tapco 20's? Friend of mine is looking for spare springs, followers, floor plates.... whatever. Think the springs are primary focus. Any help will be greatly appreciated. Thanks.
Logged

Onepoint

  • Administrator
  • SKS Guru
  • *****
  • Posts: 32460
  • نعم أنا كافرة, شكور ل يسأل!
Re: Tapco 20rd springs - parts
« Reply #1 on: February 23, 2021, 07:51:14 AM »
Tapco was bought up and shut down, so finding springs specific to them is going to be tough.  Maybe some 20rd AK mag springs can be used, but probably will mean buying 20 rd mags because the only springs I know of are for 30s.
Logged
Experience is the hardest kind of teacher, it gives the test 1st and the lesson after.

Courage is knowing it may hurt and doing it anyway.
Stupidity is the same.
This is why life is so hard.

Greatguns

  • Board Supporter
  • SKS Guru
  • *****
  • Posts: 11104
  • Inventor of the Intrafuse stock folding adapter
Re: Tapco 20rd springs - parts
« Reply #2 on: February 23, 2021, 09:44:14 AM »
Might try Wolff Springs and see what they recommend. You could buy 30rnd AK mag springs and cut them to length.
Logged

1mlt

  • Board Supporter
  • SKS Guru
  • *****
  • Posts: 13299
  • No place but TEXAS
    • TheSKSmagAdapter, LLC
Re: Tapco 20rd springs - parts
« Reply #3 on: February 23, 2021, 01:57:54 PM »
Try Promag 20 round springs.
Logged
There is but one language and that is the English language. Teddy R., 1907
Duck-bill-less mag adapters for the SKS are located at
www.thesksmagadapter.com

Greatguns

  • Board Supporter
  • SKS Guru
  • *****
  • Posts: 11104
  • Inventor of the Intrafuse stock folding adapter
Re: Tapco 20rd springs - parts
« Reply #4 on: February 23, 2021, 02:14:44 PM »
Quote from: 1mlt on February 23, 2021, 01:57:54 PM
Try Promag 20 round springs.

There ya go, probably not going to get closer than that. Good call Marcus
Logged

Shepherd1

  • SKS Newbie
  • Posts: 9
Re: Tapco 20rd springs - parts
« Reply #5 on: February 27, 2021, 12:16:24 PM »
Thank you for the suggestions, greatly appreciated.
Logged
Pages: [1]   Go Up
« previous next »