« previous next »
Pages: 1 ... 52 53 [54] 55   Go Down

Author Topic: My mods on SKS rifles.  (Read 140740 times)

0 Members and 6 Guests are viewing this topic.

monaderio

  • SKS Sniper
  • *****
  • Posts: 743
Re: My mods on SKS rifles.
« Reply #795 on: October 19, 2025, 03:30:54 AM »
The additional pictures:
Logged

PAX

  • SKS Guru
  • **
  • Posts: 5089
  • ALL IS NOT QUIET ON THE WESTERN FRONT
Re: My mods on SKS rifles.
« Reply #796 on: October 19, 2025, 07:10:13 AM »
Couple of nice builds Edward!
I ended up with a few shaved bolts from Lkermit and put one in my Shernic as well. I modified all my duckbills lips, except the 75 round Korean drum, to accept strippers too. But since I'm a Kali occupant and limited to 10 without registration as an AW, but the chassis is ready for big mags. It's kinda of beatch to change.
Where I'll most likely use the mags is on a modified Drag stock build in the works, mainly because the stock mag replacement is simpler. It'll have some sort of glass, I've got ATI and Choate furniture to play with. When I get the bits together, I'll see what fits better. The last of my shaved bolts is on the way to "the SKSguy45". PAX
Logged
"A free people ought not only be armed and disciplined", George Washington,
"but they should have sufficient arms and ammunition to maintain a status of Independence from any who might attempt to abuse them." Sent from behind the KaliKurtain. PAX

monaderio

  • SKS Sniper
  • *****
  • Posts: 743
Re: My mods on SKS rifles.
« Reply #797 on: January 03, 2026, 04:21:52 PM »
I received a broken Ram-Line polymer stock along with the SKS parts and decided to begin a new project.
The primary goal is to connect the appropriate buttstock via a Picatinny rail connection.
The first step is to fill the open compartments on both sides with black epoxy resin.
I added a pin to the epoxy reinforcement.
Logged

monaderio

  • SKS Sniper
  • *****
  • Posts: 743
Re: My mods on SKS rifles.
« Reply #798 on: January 04, 2026, 08:02:29 PM »
One side is completed.



Logged

monaderio

  • SKS Sniper
  • *****
  • Posts: 743
Re: My mods on SKS rifles.
« Reply #799 on: January 06, 2026, 04:31:04 PM »
The opposite side was filled with black epoxy resin. After the epoxy resin has cured, the rear part of the stock will be reshaped with a belt sander to accommodate the Picatinny rail adapter or AR-15-style adapter.
Logged

monaderio

  • SKS Sniper
  • *****
  • Posts: 743
Re: My mods on SKS rifles.
« Reply #800 on: January 07, 2026, 11:00:08 PM »
Almost finished.

Logged

monaderio

  • SKS Sniper
  • *****
  • Posts: 743
Re: My mods on SKS rifles.
« Reply #801 on: January 08, 2026, 08:01:19 AM »
The AK-47 Magpul pistol grip was modified and professionally mounted to the stock.

Logged

monaderio

  • SKS Sniper
  • *****
  • Posts: 743
Re: My mods on SKS rifles.
« Reply #802 on: January 08, 2026, 10:14:00 AM »
The stock adapter is finished. It is compatible with both AR-15 and Picatinny rail buttstocks.
Logged

monaderio

  • SKS Sniper
  • *****
  • Posts: 743
Re: My mods on SKS rifles.
« Reply #803 on: January 08, 2026, 01:46:07 PM »
The current buttstock variation.


Logged

monaderio

  • SKS Sniper
  • *****
  • Posts: 743
Re: My mods on SKS rifles.
« Reply #804 on: January 08, 2026, 07:38:30 PM »
Another project has been completed.
« Last Edit: January 08, 2026, 11:16:08 PM by monaderio »
Logged

PAX

  • SKS Guru
  • **
  • Posts: 5089
  • ALL IS NOT QUIET ON THE WESTERN FRONT
Re: My mods on SKS rifles.
« Reply #805 on: January 08, 2026, 09:43:11 PM »
Way to fab and tinker Ed. The Khyber Pass is Strong with this fella. PAX
Logged
"A free people ought not only be armed and disciplined", George Washington,
"but they should have sufficient arms and ammunition to maintain a status of Independence from any who might attempt to abuse them." Sent from behind the KaliKurtain. PAX

monaderio

  • SKS Sniper
  • *****
  • Posts: 743
Re: My mods on SKS rifles.
« Reply #806 on: January 09, 2026, 12:05:16 PM »
Quote from: PAX on January 08, 2026, 09:43:11 PM
Way to fab and tinker Ed. The Khyber Pass is Strong with this fella. PAX

There is nothing exceptional about this; the broken stock has been given a second life with the ability to attach the folding or any other stock.
Logged

monaderio

  • SKS Sniper
  • *****
  • Posts: 743
Re: My mods on SKS rifles.
« Reply #807 on: January 09, 2026, 03:07:43 PM »
I believe this folding buttstock is the best option. It matches the stock perfectly.

Logged

cvasqu03

  • Board Supporter
  • SKS Guru
  • *****
  • Posts: 6368
Re: My mods on SKS rifles.
« Reply #808 on: January 09, 2026, 04:51:07 PM »
Very nice!  It's good that you're having fun with your builds.  There used to be a lot of interesting posts like this in the past, but since the cheap SKS's dried up, there haven't been that many people making mods lately. 
Logged
I am the one they call Cesar.

monaderio

  • SKS Sniper
  • *****
  • Posts: 743
Re: My mods on SKS rifles.
« Reply #809 on: January 09, 2026, 06:54:53 PM »
Quote from: cvasqu03 on January 09, 2026, 04:51:07 PM
Very nice!  It's good that you're having fun with your builds.  There used to be a lot of interesting posts like this in the past, but since the cheap SKS's dried up, there haven't been that many people making mods lately.





I have all of the necessary tools to repair and improve the rifle. If I get a broken stock, why not try to fix it?
Logged
Pages: 1 ... 52 53 [54] 55   Go Up
« previous next »