Author Topic: S&W sigma barrels??  (Read 2561 times)

0 Members and 1 Guest are viewing this topic.

7.62 Re[)E^^Pt!oN

  • Board Pimp
  • Board Supporter
  • SKS Guru
  • *****
  • Posts: 2905
  • We make war, that we may live in peace.
S&W sigma barrels??
« on: February 05, 2010, 03:54:11 PM »
Any of you fine gentlemen know where I can find threaded
barrel for my brothers sigma 9mm sw9ve. I've done a lota
searchin the usual places, but ain't found nuttin yet. Any help would
much appreciated! Thanks fellas.
From out the pyre, a new life is born...

sirk798

  • Board Supporter
  • SKS Gunsmith
  • *****
  • Posts: 1168
Re: S&W sigma barrels??
« Reply #1 on: February 05, 2010, 03:56:14 PM »
keeping my eye on this. I have not seen any in my searches either....


PS. I believe I spelled everything correct here LOL

jwperry

  • Master and Commander
  • Board Supporter
  • SKS Guru
  • *****
  • Posts: 4815
  • The dolt behind the bolt.
Re: S&W sigma barrels??
« Reply #2 on: February 05, 2010, 07:08:58 PM »
These guys will extend his barrel and add threads to it. Some guys at HKpro.com did it with their P30s and they said it was pretty solid.

http://www.adcofirearms.com/shopservices/shop_.cfm?code=1
Success is a poor teacher.
Failure is a cruel teacher; the lesson is often presented at the worst time.

7.62 Re[)E^^Pt!oN

  • Board Pimp
  • Board Supporter
  • SKS Guru
  • *****
  • Posts: 2905
  • We make war, that we may live in peace.
Re: S&W sigma barrels??
« Reply #3 on: February 06, 2010, 12:07:24 AM »
Thanks jw. I found, and looked at some Storm Lake barrels that are extended, and threaded
for the glock 17 and 19,and since I heard the sigma's are very similar in design,
I was curious if anyone could tell me how much differencen there is between them.
I haven't looked closely at his barrel, but he has told me there are minor differnces
between the two. Anybody know for sure if their interchangeable?


Oh , BTW sirk, check out stormlakebarrels.com
From out the pyre, a new life is born...

jwperry

  • Master and Commander
  • Board Supporter
  • SKS Guru
  • *****
  • Posts: 4815
  • The dolt behind the bolt.
Re: S&W sigma barrels??
« Reply #4 on: February 06, 2010, 12:53:31 AM »
I doubt they are interchangeable. The only Sigma I've ever had was a .380 so I can't make a direct comparison to how it would lock up on a Glock. But from memory's comparison I'd say that the recoil assemblies wouldn't be interchangeable so I don't think you'd be able to use it.

bulldog136 or ranger1968 would definitely be able to answer that as they are both Glock armorers.
Success is a poor teacher.
Failure is a cruel teacher; the lesson is often presented at the worst time.

7.62 Re[)E^^Pt!oN

  • Board Pimp
  • Board Supporter
  • SKS Guru
  • *****
  • Posts: 2905
  • We make war, that we may live in peace.
Re: S&W sigma barrels??
« Reply #5 on: February 06, 2010, 02:00:10 AM »
Gotcha. Thanks for the tip jw.
I'll pm bulldog and see what he knows bout this.
From out the pyre, a new life is born...