Stop pounding on your bolt with a hammer!

By popular demand I have created an easier method to remove the SKS FP retaining pin.
All it requires is the front sight tool that most of you are familiar with, and a new 10mm X 1.00 pitch bolt that needs to be turned down at the tip approximately .35 back and .135 to .140 around. This will enable the retaining pin to stay in the bolt, but the FP & extractor can come off.
The 10mm X 1.00 pitch bolt was not easy at all to find as its a real odd-ball.
I will probably post them for sale, minus the sight tool.
Please click on the picture to start the video...


